Navigate to the undefined homepage

FAST DELIVERY
We Understand Your Urgency

Genie Clicker Transmitter G3TR

Genie G3T Remote Control Transmitter

Genie Remote Control Transmitter

0 Reviews
$0.00
Product Code: G3T-R
Genie G3T-R Garage Door Opener
This is a 3 button remote control transmitter, which can be used to operate up to 3 Genie garage door openers using IntelliCode radio controls version 1 and/or 2. This remote is defaulted to operate the new IntelliCode 2 Genie garage door openers, but you can also program individual buttons to operate other IntelliCode 1 (pre 2011) models of Genie garage door openers made from 1998 to present. To change a button to operate a pre 2011 IntelliCode opener, the default IntelliCode 2 setting must be changed to IntelliCode 1. An LED light on the remote displays which mode the remote button is in:Red indicator light will = IntelliCode 1 / Green will = IntelliCode 2. You can manually toggle between the two.To set one of the 3 buttons to be IntelliCode 1 (Red indicator Light), follow the detailed instructions below:Select a button on the remote that has not been programmed to a Genie garage door opener yet.Press and hold the button you have chosen to switch for 10 seconds. Both Red and Green LEDs will be on and stay on.Press that same button twice once both lights are on to toggle IntelliCode selection from IntelliCode 2 to IntelliCode 1.Press the same button again to confirm it has been switched to IntelliCode 1. the LED should be Red. The IntelliCode selection for this button is set to IntelliCode 1. To switch back just reverse the steps above.This product replaces these old part numbers.GIT-1, GIT-2, GIT-3, ACSCTG Type 1, ACSCTG Type 2, ACSCTG Type 3, TBSTG, GIC90-1, GMIC90-3, GIC90-2, GMIC-3BL, GIC90-3, OCDT, G2T-1, G2T-2, G2T-3, GICTD-1, GICT390-1, GIFT390-1, GIT390-4 and G3T-R

Reviews

Average Customer Review:
( 0 )