{"product_id":"dual-encoder-motor-assembly-41014r-s","title":"Dual Encoder Motor Assembly | 41014R.S","description":"\u003cp\u003eIs your Genie or Overhead Door garage door opener straining, stalling, or making grinding noises as it travels? The drive motor is what turns your opener's belt or chain drive gear—when it wears out or the encoder loses its signal, the door slows down, reverses on its own, or stops responding to the travel limits. This dual-encoder motor assembly is the genuine direct replacement.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit my opener?\u003c\/h3\u003e\n\u003cp\u003eThis motor uses two internal encoders (RPM sensors) instead of one, so it only fits openers built for a dual-encoder control board.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenie belt and chain drive models: 3022, 3024, 3042, 4022, 4024, 4042\u003c\/li\u003e\n\u003cli\u003eOverhead Door Odyssey 1000 (Model 7030) and Destiny 1200 (Model 8030) belt and chain drive openers\u003c\/li\u003e\n\u003cli\u003eHow to confirm: check the model\/serial sticker on your opener's motor housing, then open the control board cover—a dual-encoder board has two RPM sensor wires running to the motor housing instead of one. If you only see a single encoder wire, you need the single-encoder predecessor motor instead (we sell that separately as the 140V DC Motor | 38727A—don't order this dual-encoder unit for a single-encoder board)\u003c\/li\u003e\n\u003cli\u003eThis does not fit screw-drive openers—those use a different dual-encoder motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 140V DC\u003c\/li\u003e\n\u003cli\u003eMotor type: dual optical encoder (RPM sensor) assembly\u003c\/li\u003e\n\u003cli\u003eReplaces part 38727A.S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotor assembly with mounting hardware\u003c\/li\u003e\n\u003cli\u003eDual optical encoder with cover\u003c\/li\u003e\n\u003cli\u003eMotor and encoder wiring harness\u003c\/li\u003e\n\u003cli\u003ePrinted instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe belt or chain drive rail assembly is not included.\u003c\/p\u003e\n\u003ch3\u003eWorks With \/ Replaces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Genie\/Overhead Door part 38727A.S, which itself replaced the earlier 36969R.S IntelliG 1000\/1200 motor\u003c\/li\u003e\n\u003cli\u003eDo not confuse with 38631A.S (Dual Encoder DC Screw Drive Motor) or 39045R.S (Dual Encoder AC Screw Drive Motor)—those fit screw drive openers, not belt\/chain drive\u003c\/li\u003e\n\u003cli\u003ePairs with Genie ChainMax, IntelliG, and SilentMax control boards, and Overhead Door Odyssey\/Destiny control boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eDisconnect the opener from power before starting, and pull the emergency release so the door is manually operable and disconnected from the opener during the repair. Remove the light lens and bulbs, disconnect the wall control and safety sensor wiring, detach the door arm, and separate the rail from the motor head. Remove the motor cover and wiring harnesses, then remove the three motor mounting bolts to swap in the new motor—confirm you're matching single-encoder to single-encoder or dual-encoder to dual-encoder before reassembly. Reinstall in reverse order and reprogram the opener's travel limits before test-running the door.\u003c\/p\u003e","brand":"Overhead Door","offers":[{"title":"Default Title","offer_id":47559632355604,"sku":"41014R.S","price":224.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7589\/9668\/files\/140V_DC_Motor_38727A_Main.jpg?v=1705957782","url":"https:\/\/www.door-parts.com\/products\/dual-encoder-motor-assembly-41014r-s","provider":"DOOR-PARTS","version":"1.0","type":"link"}