{"product_id":"header-990-35421a-s","title":"Header 990 | 35421A.S","description":"\u003cp\u003eIs your opener's rail pulling away from the wall, sagging at the front, or shifting every time the door runs? The header bracket is the front anchor point of your garage door opener. It fastens to the header board above the door, and the front end of the rail pins to it. When it bends, cracks, or pulls loose, the rail moves out of line, the door travel goes uneven, and the opener works harder than it should. This genuine Genie header bracket is the direct replacement for screw drive openers.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit my opener?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOverhead Door OverDrive (Model 990) screw drive openers\u003c\/li\u003e\n\u003cli\u003eGenie H4000 and H6000 screw drive openers\u003c\/li\u003e\n\u003cli\u003eOlder units that originally used Genie part 22668A, which this part supersedes\u003c\/li\u003e\n\u003cli\u003eHow to confirm: a screw drive opener has a long threaded steel rod running down the center of the rail. Check the model sticker on the powerhead, and compare the shape of your old bracket to the photos before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 35421A.S\u003c\/li\u003e\n\u003cli\u003eSupersedes: 22668A\u003c\/li\u003e\n\u003cli\u003eBrand: Genie (genuine OEM)\u003c\/li\u003e\n\u003cli\u003eDrive type: screw drive\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Header bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLag screws and the rail pin aren't listed as included. Reuse your existing hardware if it's in good condition.\u003c\/p\u003e\n\u003ch3\u003eWorks With \/ Replaces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Genie part 22668A\u003c\/li\u003e\n\u003cli\u003eMounts the front of the rail only. The door bracket and door arms that connect the carriage to the door are separate parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eClose the door and unplug the opener. Support the front end of the rail with a ladder or block so it can't drop, then remove the pin that connects the rail to the old bracket. Remove the lag screws and take the old bracket off the header. Fasten the new bracket in the same position, centered over the door and screwed into solid framing, not just drywall. Reattach the rail with the pin, plug the opener back in, and run the door through a full cycle to check that the travel limits are still set correctly.\u003c\/p\u003e","brand":"Genie","offers":[{"title":"Default Title","offer_id":67655317520660,"sku":"35421A.S","price":6.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7589\/9668\/files\/header_4.jpg?v=1792598423","url":"https:\/\/www.door-parts.com\/products\/header-990-35421a-s","provider":"DOOR-PARTS","version":"1.0","type":"link"}