{"product_id":"rsx-1-2-hp-hoist-brake-kit-1-phase-48-frame-111396-0004-s","title":"RSX 1\/2 HP Hoist Brake Kit (1 Phase, 48 Frame) | 111396.0004.S","description":"\u003cp\u003eThe brake is what holds a commercial door where the operator left it. When it wears out, the door drifts after it stops, creeps down on its own, or drops hard instead of settling. This is the genuine Overhead Door brake kit for RSX hoist operators running a 1\/2 HP single-phase motor — and it is also the kit used to add a brake to a hoist unit that shipped from the factory without one.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit my door?\u003c\/h3\u003e\n\u003cp\u003eOverhead Door builds four different brake kits for the RSX and they are not interchangeable. This one, part number 111396.0004, is the hoist \/ single-phase \/ 1\/2 HP kit for a NEMA 48 frame motor. Overhead Door's own kit description for this part number reads \"BRAKE KIT, H, 1PH, 1\/2HP\" — the H stands for hoist.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e hoist (H) models only. Side-mount, center-mount and trolley RSX units take a different brake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1\/2 HP, single phase, NEMA 48 frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit or replacement:\u003c\/strong\u003e Overhead Door's instruction sheet for this service number covers both replacing a worn brake and adding a brake to a hoist unit that was not factory equipped with one. The kit ships with the hoist bracket assembly and release link needed for that retrofit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to confirm before you buy:\u003c\/strong\u003e find the data label on the operator housing and check that the model reads RSX, then note the horsepower and the phase. Next, read the motor's own nameplate for the frame size — this kit is for a 48 frame. If the operator couples to the door shaft with a hoist, you have a hoist unit; if it pulls a trolley along a rail, you do not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit does not fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3-phase 1\/2 HP hoist, or any 3\/4–1 HP hoist — you need \u003cstrong\u003e111396.0005\u003c\/strong\u003e (56 frame).\u003c\/li\u003e\n\u003cli\u003eRSX side-mount or rolling-steel with a 1\/2 HP single-phase motor — you need \u003cstrong\u003e111396.0001\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eRSX side-mount or rolling-steel with any other motor — you need \u003cstrong\u003e111396.0002\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eRHX heavy-duty operators — you need \u003cstrong\u003e111857.0001\u003c\/strong\u003e or \u003cstrong\u003e111861.0001\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eRMX operators — you need brake band kit \u003cstrong\u003e110956.0001\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperator: Overhead Door RSX standard-duty commercial operator, hoist configuration\u003c\/li\u003e\n\u003cli\u003eMotor: 1\/2 HP, 1 phase, NEMA 48 frame\u003c\/li\u003e\n\u003cli\u003eBrake system: 24V DC disc brake, the RSX progressive braking system\u003c\/li\u003e\n\u003cli\u003eShipping weight: 3 lb 15.1 oz\u003c\/li\u003e\n\u003cli\u003eOverhead Door service part number: 111396.0004.S\u003c\/li\u003e\n\u003cli\u003eGenuine Overhead Door \/ Genie X-Series part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrake assembly\u003c\/li\u003e\n\u003cli\u003e(4) Nyloc nuts\u003c\/li\u003e\n\u003cli\u003e(4) O-rings\u003c\/li\u003e\n\u003cli\u003e(4) Spacer sleeves\u003c\/li\u003e\n\u003cli\u003e1cc grease packet\u003c\/li\u003e\n\u003cli\u003eBrake harness\u003c\/li\u003e\n\u003cli\u003eHarness bushing\u003c\/li\u003e\n\u003cli\u003eHoist bracket assembly\u003c\/li\u003e\n\u003cli\u003eHoist release link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContents per Overhead Door installation instructions P\/N 111416.0003.\u003c\/p\u003e\n\u003ch3\u003eWorks With \/ Replaces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Overhead Door RSX standard-duty commercial operator, hoist models, 1\/2 HP single phase, 48 frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion kit:\u003c\/strong\u003e 111396.0005 covers 3-phase 1\/2 HP and 3\/4–1 HP hoist units on a 56 frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-hoist equivalents:\u003c\/strong\u003e 111396.0001 for 1\/2 HP single phase, 111396.0002 for all other motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation instructions:\u003c\/strong\u003e Overhead Door P\/N 111416.0003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso written as:\u003c\/strong\u003e 111396-4, 111396.0004\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eWork from Overhead Door's installation instructions, P\/N 111416.0003. They cover both first-time installation on a hoist unit with no factory brake and straight replacement of a worn brake. The brake mounts to the motor face, which is why the procedure and the parts differ between the 48 frame and 56 frame kits — confirm your frame size before you start. The kit includes a 1cc grease packet; use it where the instructions call for it and not elsewhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Disconnect and lock out power at the breaker before you touch the operator. The brake is what holds the door in position. With the brake removed or released, a door that is out of balance can fall. Secure the door in the closed position before you begin, and do not rely on the operator or the old brake to hold it while you work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e A commercial door brake is a safety device. If the door will not hold position after the brake is installed, take the door out of service and have it inspected by a qualified commercial door technician before putting it back into use.\u003c\/p\u003e","brand":"Overhead Door","offers":[{"title":"Default Title","offer_id":53938656706836,"sku":"111396.0004.S","price":209.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7589\/9668\/files\/brakekit_2.jpg?v=1793995328","url":"https:\/\/www.door-parts.com\/products\/rsx-1-2-hp-hoist-brake-kit-1-phase-48-frame-111396-0004-s","provider":"DOOR-PARTS","version":"1.0","type":"link"}