Wayne Dalton TorqueMaster Original Replacement Spring | TM/TM1
How to Order TorqueMaster Springs
Most Competitive Pricing You Will See!
We want you to get your door fixed without the stress of worrying about cost.
You can find most of the TorqueMaster ordering information you need labeled on your garage door spring tube. Most doors have this information located on the LEFT SIDE of the spring tube. The word weight has two common abbreviations; Wt. and Wgt.
We have simplified the ordering process to ensure a smooth experience for our customers. We understand the urgency and frustrations that come with a broken garage door. If you have any doubts, comments, or any questions locating ordering information please reach out using the chat feature below or by emailing us using the Contact Us page.
It is recommended you replace all springs. Residential springs have a life expectancy of 10,000 cycles. Depending on use, this is an average of 6-7 years. If one spring has failed it is likely the paired spring will soon fail as well.
Order now to get your garage door up and running in no time.
In stock & ships same business day!
Wayne Dalton TorqueMaster Original Replacement Spring | TM/TM1
-
Spring TypeTorqueMaster Original | TM/TM1
-
Inside Diameter (ID)0.650
When replacing TorqueMaster Springs it is necessary to identify if the door utilizes the original TorqueMaster One, or the newer TorqueMaster Plus spring system.
The easiest way to distinguish these is by visually inspecting the end brackets. ToqueMaster One has a counter and winding fitting to the end, while TorqueMaster Plus has the anti-drop pawl and rachet gear inside the end bracket. You can also determine each type of spring system by looking at the winding shaft on the end of the springs.
The counterbalance weight (e.g. Wt. or Wgt.) on the sticker is the most important when determining the correct spring needed.
The spring's job is to store the mechanical energy from the weight of the door. When this is done correctly the Opener | Operator has to do minimal work. It is best practice to choose springs within 10 pounds of the garage door weight as outside that will cause the motor to work harder than needed to open/close the garage door.
How to Install ToqueMaster Springs
A quick and easy DIY project for your broken Wayne Dalton garage door.
