Welcome! Email us if you have any questions.

Fast Shipping! We understand your urgency. Learn More
1 5

RHX Heavy Duty Replacement Motor | 111502

Overhead Door  |  SKU: 111502.0001.S
$530.97
Shipping calculated at checkout.

Fits Overhead Door RHX and Genie GCL-GT / GCL-GH operators.

Replacement motor for heavy-duty commercial operators: the Overhead Door RHX and the Genie GCL-GT and GCL-GH. Use it when the motor hums but won't turn, trips the breaker, or has burned out.

Match the horsepower, phase, and voltage on your old motor's nameplate.

Specifications
Best Use Commercial, Industrial
111502.0001.S 1/2 HP, 1 phase, multivoltage (GT / GH)
111502.0002.S 3/4 HP, 1 phase, open drip-proof
111502.0003.S 1 HP, 1 phase, multivoltage (GT / GH)
111502.0006.S 1 HP, 3 phase, open drip-proof
Operators Overhead Door RHX, Genie GCL-GT and GCL-GH

Compatible Operators
  • Overhead Door RHX

Installation

In the box: motor and harness assembly.

Tools: 9/16 in. wrench or socket, screwdrivers, pliers. About 30 minutes.

  1. Close the door and remove power with lockout/tagout.
  2. Unplug the motor harness from the circuit board. Note which plug it was in.
  3. Remove the clip from the electric box and feed the harness wires out through the slot.
  4. Remove the 4 bolts and star washers holding the motor to the gear reducer. Keep them.
  5. Align the key slot on the new motor shaft with the gear reducer and reinstall the 4 bolts and star washers.
  6. Feed the harness into the electric box, replace the clip, and plug the motor into the correct voltage location on the main circuit board.

Warning: Disconnect power before removing the electric box cover. Plugging the motor into the wrong voltage location can damage the motor or board.

Documents

Resources

HX Motor Replacement Instructions
Back to top