Welcome! Email us if you have any questions.

Fast Shipping! We understand your urgency. Learn More

RHX Hoist Friction Clutch | 111817.0002.S

Overhead Door  |  SKU: 111817.0002.S

Regular price $525.97
Shipping calculated at checkout.

Fits Overhead Door RHX hoist operators, 1/2 and 1 HP.


Replacement friction clutch for Overhead Door RHX hoist operators, 1/2 and 1 HP. The clutch protects the door and operator by slipping instead of breaking something when the door binds.

It adjusts in place with three bolts, so it doesn't need to come apart to set tension.

Specifications

Best Use Commercial, Industrial
Used on RHX hoist (RHXH), 1/2 and 1 HP only
Adjustment 3 bolts, no disassembly needed

Compatible Operators

  • Overhead Door RHX

Installation

Adjusting the clutch

  1. Adjust in very small steps, about 1/4 turn of the adjustment bolts at a time.
  2. Turn all 3 adjustment bolts the same amount. Clockwise increases tension, counter-clockwise decreases it.
  3. Set tension just above what it takes to open and close the door without the clutch slipping.

Note: If a clutch starts slipping after working fine, check that the door moves freely by hand first. The door may be binding or the springs may need adjustment. The clutch protects equipment and is not an entrapment safety device.

Questions

My clutch started slipping. Do I need a new one?

Not always. Check that the door moves freely by hand first. A binding door or springs out of adjustment can make a good clutch slip. If the door is fine and the clutch still slips at proper tension, replace it.

Does it fit 3/4 HP units?

The RHX manual lists this clutch for 1/2 and 1 HP hoist operators only.